Hello!
I'm having trouble connecting a CerboGX to a Raymarine Axion MFD. Raymarine MFD and the CerboGX are updated.
I'm doing this on a testbench to make sure it works before installing.
Equipment in use:
- CerbGX
- RayNet (F) to RJ45 (M) - 1m
- 100Ah Lithium Battery
- SmartShunt (to have a device connected).
The main problem is that the Victron App not appearing on the MFD. I have tested, and read, and tested again, but I have found no solution.
I have seen many people having trouble with this integration.
Can anyone give me some advice here?
