Hi, anyone found the release notes regarding firmware V507? Thanks..
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, anyone found the release notes regarding firmware V507? Thanks..
In the firmware change log on the professional site, like it always has been.
November 2023
|
If you are doing the upgrade for fan noise
don't bother, mine are still just as loud... have a HQ2241 and a HQ2243
I also get a 404 when trying to download the file. My serial number is HQ2226 so I think I'll get the latest FW installed tomorrow and see if it makes any difference. Anyone else tried it on an HQ2226?
FYI, if you link your Victron Professional account to Dropbox then the file is available successfully from Dropbox. I was able to confirm that my serial number is NOT in the list of affected inverters and so FW v507 probably won't improve my fan noise. Not a big deal because I don't find it to be a problem anyway.
My three inverters are:
- HQ2237
- HQ2238
- HQ2246
The first two are in the list, the last one isn't.
Note to self don’t update from mobile phone! It ended up not liking the saved config file in the file system on iphone, which could have been a bad day had I not saved the config via the MK3 minuets before.
HQ2301 updated fine straight from the VRM took a while to get over 41% my first update on the live system. So glad I saved it via the MK3
Apologies for the 404 error on the link to the affected serial numbers - here is the file while I try and resolve it -
202311 – MP-II serial numbers with FAN calibration issue.xlsx
97 People are following this question.