Hello, I'm new here,
have a Multi RS 48/6000 Dual Tracker inverter, connected via VE.Can to Cerbo S GX. It works with CAN-Bus-Profile VE.CAN & CAN-Bus BMS (250 kBit/s).
But Pylontech akku bank uses also VE.Can with different parameters (CAN-BUS BMS 500 kBit/s). Manual means, inverter can be the only device what is connected to VE.Can sockets on the cerbo in the same time. Inverter/Pylontech device connected by itself works good.
Tried to upload screenshots (No link in upload response)
Best regards Harald