This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi - I just got the Blue Smart IP67 charger. It states that for Lithium-ion batteries, the charging voltage is 14.2V, and float is 13.5V. My batteries are rated differently: 14.6V/13.8V. Is there a way to reconfigure the charger with the proper voltage? I couldn't find such option in the app. Appreciate any help!
Hi @mliberte
No, unfortunately this charger is not yet configureble.
Of the smaller chargers, only the phoenix-smart range is currently fully configurable.
https://www.victronenergy.com/chargers/phoenix-smart-ip43-charger
I've just purchased an IP67 Smart Charger, and on the Product Page it clearly states:
All settings of the charger can be configured with the VictronConnect app.
On that basis I purchased it with the expectation that I could use it to charge an LTO battery, and adapt the charging settings as required. Only now I find this is not the case. Disappointing.
Can you advise if or when the this charger will be fully configurable as clearly advertised?
