I can not find any information about the allowed flash write cycles on Cerbo GX?
Background is, i want to run a script which set once per minute the MaxDischargePower to prevent ESS from this on/off 20 times a day during winter when it always load the battery 10 minutes, then discharges 2 minutes and repeat that forever. So there are scripts, which set the MaxDischargePower to 80% of solarPower when SOC is < minSCO + 5%. This keeps ESS on and takes lots of load from the battery.
But my concern is that the Cerbo GX flash will die because of this very frequent write commands. And the Flash can not be replaced and the GX device must at least life for 20 Years or so...
So is there any Information on "how much writing" this flash can endure? Or any long therm experience from one who write to the settings each minute over years?