question

joris-trooster avatar image
joris-trooster asked

Only on delayed charging: EV Charger says 'charged' but car battery is empty

When I connect my car (Volvo XC90 T8) to the charger (new model without display), it starts charging the car (manual mode, autostart enabled).

When I stop the charging and leave the cable connected to resume charging later (when energy prices are low or the sun is shining), it starts charging, but a few seconds later, it stops, and the charging status says 'charged'.

The strange thing is that it immediately starts charging when I unlock the car. If I use the Volvo on Call app to unlock the vehicle remotely, it also starts charging immediately (although that does not open the doors, only if you touch the trunk lock within 2 minutes).

I, therefore, cannot start the charging programmatically (via node-red, for example) because it thinks the car is charged while it is not. I never had this with my previous two chargers (Shell Recharge and Zappier).

The charge current is set to 16A (the max; the car only charges on one phase), and I have done the CP calibration multiple times.


evcs
5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

motylu avatar image motylu commented ·

Hello @Joris Trooster .

Very similar experiences I had with Renault Zoe. After several stops and starts in Auto mode due to low available PV power (in older FW versions of the EVCS without possibility to charge from battery/grid for defined time), EVCS goes to Charged state and stays in it. But when I go around the vehicle with car key in my pocket, Zoe unlocks the door and suprisingly charging process automatically starts again...

Also I had another problem with Zoe and EVCS Charged state described here:

https://community.victronenergy.com/questions/223522/unable-in-node-red-to-stop-charging-on-ev-charging.html

0 Likes 0 ·
Show more comments
2 Answers
james-simpson avatar image
james-simpson answered ·

Hi, I’ve got the same problem. My charger is all controlled via MQTT and Home Assistant. If the car is given a bit of charge during the day but then it’s paused until cheap overnight period, when is started again the status changes to “charged” and it won’t start again. When it’s unlocked it will start again. I’ve tried updating EVCS Firmware to 1.28 and performed a CP Calibration. I’ve got an MG ZS EV but from reading around can’t find anyone with a similar issue. However it seems that a few people are experiencing exactly this behaviour with the Victron EVCS. Is there anything else I can try please?

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lucian Popescu (Victron Energy Staff) avatar image Lucian Popescu (Victron Energy Staff) ♦♦ commented ·
Hi, that's an issue with the vehicle, not the charger. The vehicle computer that communicates with the EVCS, for minimizing the consumption, goes to sleep. And this is happening if a cable is connected but not charging.

A suggestion for you would be to find out how long it takes to do this, and maybe from time to time, to start charging

0 Likes 0 ·
james-simpson avatar image james-simpson Lucian Popescu (Victron Energy Staff) ♦♦ commented ·
Thanks, I'll give that a go.
0 Likes 0 ·
freequader avatar image
freequader answered · 
Je me rends compte que quelle que soit la marque du véhicule sur le même problème alors qu'avec un chargeur ordinaire ça marche. De mon côté, lorsque j'ai un disjoncteur commandé à distance ou à temps, je l'éteins puis je rallume l'EVCV et la charge reprend.
Et du coup le mode programme devient inutile... dommage
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic