This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
1) EV charger shows more power, than is actually delivered. You can see this on VRM and also on EV charger display.. EV Charger works on L1 and L2, so maximum power EV charger delivers is 2278+2344 = aproximately 4622 but it shows 5360W. Where is bug?
2) layout of charger is different on VRM and on display
What do you have you're Power Calibration set as in the General tab? You can use this variable to allign the actual power consumed against the reported in the UI. Mine is set to 0.83 and is reasonably accurate now
I also have the same issue and I have carried out the CP calibration several times. The problem is that there are different deviations depending on where I charge the car from. When the power comes directly from the PV system, the deviation is around 1000, as I shown in the photos. But when the power comes from the grid, the deviation is in the hundreds. Therefore, the power calibration for one case is not correct for the other.
I am still waiting for a solution here.
