question

Trung avatar image
Trung asked

Overriding ESS during Communication loss

Hi All

I hope everyone is good and well in this community.

I hope there is an expert out there that can help me (thank you in advance):

My setup - MPII - Lifepo4 / Cerbo GX / Solar arrays (small ~1kw).

I am using ESS to charge batteries when there isn't a lot sunshine and when electricity rates are low. I have had instances when there is "Communication" loss/errors and I have tried to reboot everything but, the communication loss/errors did not clear.

So when the loss/errors occur, I am unable to set ESS to charge at a cheap electric rate. I have tried to use the front rocker switch to get the MPII to Charge Batteries but, nothing happens.

Is there a way that I can override ESS and get the MPII to charge the batteries and also to act as Passthrough? (Until the Comms come back again - this could be hours)

Many thanks again...

Trung

ess settings
3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·
Communication loss with what? The energy meter the service provider meter?


You can in the GX in ESS just manually set keep batteries charged, or set a scheduled charge window in the cheap tariff times.

0 Likes 0 ·
Show more comments
0 Answers

Related Resources

Additional resources still need to be added for this topic