This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
I updated my Cerbo GX to v 3.10 and after that there was no
MultiPlus-II 48/5000/70-50 in the device list any longer.
On the dashboard it is still there, but it shows "wrong" values as it says the battery is discharging with 520W whereas the "display" shows charging with 2000W.
Any ideas how to bring the MultiPlus-II back?
Best regards
Stefan
It's a known bug. You need to update the MK3 module of the GX device.
Go to the remote console -> device list -> MultiPlus and the should be a hint that there is an update for the MK3, do the update and the MultiPlus should appear in the VRM update list.
https://community.victronenergy.com/questions/231177/vrm-firmware-update-issue.html
However there is still a difference between -500w /discharging and +2000w/charging as shown in the secound picture.
???
2799W from PV - 2195W into battery = 604W DC load -> with efficiency loss 528W AC load (around 87% efficiency)
On the one hand it says that the battery is charging with 2000w and at the button of the page it says discharging with 500w
The battery is charging because you have PV production and the MultiPlus is taking 519W from the battery.
The MK3 update worked! After that the Multipus II appears like expected in the list. Thank You !
