Hi Folks.
My current setup I have ET112 that's converted and transmit over lan (90m to shed where inverter is). Then converted back to RS485 and then into GX device. I do it this way as I only have one cat6 (albeit a well shielded one) down to the shed.
It works and is passable however not perfect. My next plan was to maybe try splitting ethernet 2 pairs for 100mbps internet 2 pairs for ct clamp data. However I've not heard of a lot of success on CT clamp that length.
Anyone had success of runs at that length using well shielded twisted pairs? Just trying to judge if it's worth trying/putting effort in or if I have no chance?
