Hi,
I'm currently setting up a Victron system. I don't have an inverter/charger yet but I did already install Venus OS on a Raspberry Pi, connected an EM24 Ethernet, my SolarEdge SE10k and Batrium. For some reason my AC Loads does always equal PV Inverter power. What might be wrong? Is it because I don't have my Multiplus yet?
The EM24 is set to Grid meter (it doesn't show up under "Energy meters" in settings, should it?), the SE10K is set to AC Output. If I use any of the other alternatives it disappears from both the Remote console and from VRM. The AC Loads changes to 0W, then.
Ah, and btw, the EV Charging Station shows values which I translate from a Keba P30. That works! For some reason it doesn't show up in the Remote console, though. Should it?