I have an ESS system with a Colour Control. There is DC coupled PV through an MPPT and also a DC coupled wind turbine through its own controller. The power from the wind turbine is displayed as DC Power. There are AC loads, critical loads and a grid meter.
The problem is that when I select "Has Grid Meter" then I can see the AC Loads and the Critical Loads in separate boxes but I lose the DC Power box. When I deselect "Has Grid Meter" then I can see the DC Loads box but I lose the Critical Loads box. In the image below I have shown what I would like to see; the AC Loads, the Critical Loads and the DC Loads.
Is it possible to achieve this at the minute? If not possible then can it be added to the list of feature requests please!