The overload happened at 11.30 in phase 2, with 4100W. The warning came after some time when the load was around 3000W. Its a 5kVA multi, 4kW power.
So question is, after how long does the warning come? it should be instantaneous right?
asked
After how long does an overload warning come after the overload happens
What alerts are you referring to?
On the inverter, the lights will be flashing on the unit, the GX will show alarms in notifications.
As for the VRM (push or email) notification that is different.
It depends on how you have set your logging to the VRM and the duration for alarms. And then will further be delayed by your internet connection on the device you are using for the notification.
The idea is it is instantaneous but in reality internet is in the middle....
The overload warning that appears in the VRM portal. I cant really see the inverter is person because its on site.
So its completely normal to get the warning after the load wattage increases and then goes back down?
How do i get the setting for duration for alarms?
