question

pmilne avatar image
pmilne asked

Err 119 on updating MPPT 100/30 to firmware 1.39

I just used VRM to check and update the MPPT100/30 firmware and now get an error notification '#119 settings invalid' with the Bulk and Absorbtion LEDs flashing.

A reset (or several) doesn't help. Any suggestions?
What settings is it talking about? I only know the automatic voltage setting and the battery type.

MPPT Controllerserror
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @pmilne

We'll contact you via support today.

6 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

pmilne avatar image pmilne commented ·

Still no answer. Several more resets have failed to fix the problem.

0 Likes 0 ·
pmilne avatar image pmilne commented ·

Still no contact! Still no solar power.

Pete

0 Likes 0 ·
Daniël Boekel (Victron Energy Staff) avatar image Daniël Boekel (Victron Energy Staff) ♦♦ pmilne commented ·

Hi Pete,

My apologies, I've sent you an email.

0 Likes 0 ·
miley-hong avatar image miley-hong Daniël Boekel (Victron Energy Staff) ♦♦ commented ·

@Daniël Boekel (Victron Energy Staff) Similar issue here with MPPT100/20 after upgrading firmware to v1.39 three days ago... no error code, bulk led flashing, and no solar (get a voltage reading, but no current... was running perfectly before the firmware update) :(

Currently on the road in my truck camper and maybe have one more day of battery reserve to keep the fridge cold, before I have to shut it all down to protect the batteries from too deep a discharge. Help!

0 Likes 0 ·
Daniël Boekel (Victron Energy Staff) avatar image Daniël Boekel (Victron Energy Staff) ♦♦ miley-hong commented ·

Hi @miley_hong

I've sent you an email.

0 Likes 0 ·
hneyra avatar image hneyra commented ·

Having same issue received error 119 on mppt 150/100 after most recent firmware update unable to get system up and running properly. Please help!

0 Likes 0 ·
pmilne avatar image
pmilne answered ·

Solar power restored very effectively with a remote reboot from Victron. Thanks guys!

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual

Additional resources still need to be added for this topic