Hello,

I have read the user manual for VICTRON PHOENIX SMART IP43 charger (PSC123051095 or PSC125051095). Now I would like to ask – whether I can "only" select the maximal charge current in the VictronConnectApp between LAW CURRENT VALUE and MAXIMUM CURRENT VALUE - or can I really select the charge current "from" MINIMUM CURRENT VALUE to MAXIMUM CURRENT VALUE - freely?

Here I cite the "illustrated" example from „original“ Victron-user manual (PDF page 28):

I assume - that the example "pictured" (in the original Victron-manual) is a VICTRON PHOENIX SMART IP43 charger (24 volts/25 amps). See screenshot below. The screenshot shows: MINIMUM CURRENT: 6.2 amps. LAW CURRENT = 12.5 amps. MAXIMUM CURRENT = 25 amps. Could I choose (On this charger) the charge current (in the Victron Connect app) myself - between 6.2 amperes and 25 amperes (i.e. 6.2 or 7 or 8 or 10 or 15 or 20 or 25 amperes)? Or would that only be possible “between” 12.5 and 25 amps?

These PHOENIX SMART IP 43 charger models are offered in the original Victron user manual:

24/16, 24/25 | (1+1) & (3)Output | 120-240V

Or:

12/30, 12/50| (1+1) & (3)Output | 120-240V

Unfortunately, I did not find any precise information on setting the MIMIMUM CURRENT value in the VictronConnectApp and in PDF-user manual. Could I regulate the charge current between 15 amps and 30 amps (On "12/30" model) - or 25 amps and 50 amps on "12/50 model" (in the Victron Connect app)? Or is there perhaps a MINIMUM CURRENT value – from which I could regulate the maximal PHOENIX-IP43Charger.pngcharging current (For example: From 1 Ampere to: 2, 4, 10, 15, 16, 17, 20, 27, 30, 40 50 Ampere)?

Thanks.

dd33