This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Bonjour,
Je vois que mon multiplus peut accepter jusqu'à du 65hz en entrée, est-ce que cela ne pose pas de problème d'y faire entrer du 60hz pour lui faire sortir du 50hz ? ou est-ce qu'il accepte du 60Hz uniquement quand il est en 60hz aussi en sortie ?
When supplied with AC power, the MP syncs to the source. If 60Hz is supplied, 60Hz will be the output.
Thank you for your reply. Does this mean that it's impossible for me to power my network at 50Hz if I connect my generator which outputs 60Hz? Is there a possible solution?
Can't I force the Multiplus to output at 50Hz? It can't change the frequency?
When AC is connected to the input, it passes through the input directly to the output for loads and uses the input to charge the batteries.
You can't have an output that is different from the input.
It may help to understand that the components, most importantly the transformer, in the unit are used for both inverting and charging. As a result, it can only invert OR charge - never both at the same time.
So I can charge my batteries using my 60Hz generator as long as I disconnect the output from the MultiPlus that goes to my domestic network, which is 50Hz, to protect it... Have I understood correctly?
moins le signal est précis en entrée, plus, il sera facilement rejeté par le système. idem si il y a beaucoup de fluctuation, il sera difficile pour le convertisseur de suivre le signal
