This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi all,
I'm a bit confused about the cables to use in my setup, can please anyone just tell me which ones to buy? Between the VE Can, VE bus, VE direct, RJ45, Rj12 etc cannot really find the right ones.
I need to connect:
1 - Cerbo GX to Lynx BMS
2 - Cerbo GX to MMPT
3 - Cerbo GX to MultiPlus
Could please someone jut tell me if this will be an RJ45 for all three or I need some different cables? Thanks for help
Hi @Fordens I hope this helps.
1 . Cerbo - lynx bms: VECan - RJ-45
2. Cerbo - MPPT: ve direct cable (unless it has a VECan port in which case you can use an RJ-45 cable)
3. Cerbo - multiplus: VeBus - RJ-45
Just remember each end of the VECan network needs a terminator.
