Hy together...
Firmware 2.85 VenusGx
testing some new Controllers yesterday I ran into some issues with CAN0 (the non isolated) one...
after 3 hours of successful testing the "CAN" Device on the Venus went into an Acitve Error state, showing, on the debug sceen, some sending and receiving counters rising up, even when the Cable is disconnected (strange)... since nothing helped (rebooting in old FW), disabling, enabling.. nothing is coming and goint to the venus..
For debogging, I ssh into the Venus and via CANDUMP CAN0 there was nothing seen ...
dmesg showed some
[ 200.540318] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready
[ 201.083604] c_can_platform 481cc000.can can0: bus-off, scheduling restart in 100 ms
[ 201.200321] c_can_platform 481cc000.can can0: setting BTR=1c02 BRPE=0000
have I crashed the Venus? is there a Bug? ...
to the Victron Guys -- the system is a "Test System", so if you want, contact me .. we can "Play" around :)
the other CAN Device is working well.. (for now :) )
best to wishes
Bernhard Matschinger
