question

bolie avatar image
bolie asked

Multi RS Solar, Cerbo A/C current limit and Inverter controls

Hello All,

I have a system with both a Multi RS Solar and a Cerbo. Currently the A/C current limit and Inverter do not operate through the dedicated control on the pages screen. It can be adjusted by going into the device and changing the settings. On a previous system (Multi Plus II) the Cerbo's dedicated control on the pages screen work perfectly. Am I missing something or is this function currently not combatable with the Multi RS Solar? 1685430848232.png

cerbo gxMulti RS
1685430848232.png (37.7 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Thanks for reporting, looks like a bug/not yet implemented. I’ll pass it on to the RS team.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image
Alexandra answered ·

@Bolie

The Multi RS is not a VE Bus product so just checking how and where you have connected it to the cerbo.

Are you using VE CAN or VE direct?


6 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bolie avatar image bolie commented ·
Thanks for the prompt reply. I am using VE CAN.


0 Likes 0 ·
Alexandra avatar image Alexandra ♦ bolie commented ·
And it is definitely in the can port and terminated?
0 Likes 0 ·
bolie avatar image bolie Alexandra ♦ commented ·

Yes, it is definitely in the CAN port. I can control it from both the Cerbo and through VRM. Firmware of the Multi RS Solar is 1.11 so I will update it now to 1.12 and see if there is a change after the update.


0 Likes 0 ·
bolie avatar image bolie bolie commented ·

Controls still not available from this screen after firmware update.

1685456848159.png

Please note I can control the Inverter and current limit from the Cerbo via entering the device. 1685457126542.png

0 Likes 0 ·
1685456848159.png (39.9 KiB)
1685457126542.png (29.4 KiB)
Alexandra avatar image Alexandra ♦ bolie commented ·

@Bolie

Confirm you are using a GUI mod firmware on the GX?

0 Likes 0 ·
bolie avatar image bolie Alexandra ♦ commented ·

There are no GUI Mods. All original and the latest firmware on the RS and Cerbo.

0 Likes 0 ·