This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello All,
I have a system with both a Multi RS Solar and a Cerbo. Currently the A/C current limit and Inverter do not operate through the dedicated control on the pages screen. It can be adjusted by going into the device and changing the settings. On a previous system (Multi Plus II) the Cerbo's dedicated control on the pages screen work perfectly. Am I missing something or is this function currently not combatable with the Multi RS Solar? 
Thanks for reporting, looks like a bug/not yet implemented. I’ll pass it on to the RS team.
The Multi RS is not a VE Bus product so just checking how and where you have connected it to the cerbo.
Are you using VE CAN or VE direct?
Yes, it is definitely in the CAN port. I can control it from both the Cerbo and through VRM. Firmware of the Multi RS Solar is 1.11 so I will update it now to 1.12 and see if there is a change after the update.
Controls still not available from this screen after firmware update.
Please note I can control the Inverter and current limit from the Cerbo via entering the device. 
