This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
i recently noticed an unknown LED blink code on my Multiplus II.
I can't find it in the handbook nor in the Victron Toolkit.
The "mains on" led is flashing, and "bulk" and "inverter on" are both on (see video below).
Sorry for the rotated video ;-)
I can't see any error message or other unusual behaviour.
Any help would be greatly appreciated.
Best regards,
lakeroe
On my MP2 the mains LED blinks when power is being delivered to AC-IN
(ESS with EM24)
So maybe you are exporting to grid?
The mains flashing means waiting for mains. It is in the toolkit.
The lights not flashing have nothing to do with the light flashing.
Bulk light means it is bulk charging/bulk state.
Inverter light on means it is on and inverting.
A GX makes life easier.
I can't accept "The lights not flashing have nothing to do with the light flashing."
For example (from the "Victron Toolkit"):
"Mains on" is blinking
"Bulk", "Absorption" and "Inverter on" are on
This means: Feed-in with PV power - BatterySafe
If your statement would be true, this would also mean "Waiting for mains" ...
@mryoshii
I can confirm your information.
On my MP2 the mains LED blinks if a certain amount of power (i think somewhere around 500 watts) is being delivered to AC-IN (200 watts is NOT enough).
