question

mwiazania avatar image
mwiazania asked

Victron Multiplus II Energy to Grid

Hello,

How can I block sending excess energy to the Grid?

Anyone know the configuration?

ESS is installed.

Marcin W.

Multiplus-II
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
marekp avatar image
marekp answered ·

@mwiazania

Go to ESS selection in Remote Console.

Next go to "Grid feed in" selection.

Select "Limit system feed-in"

Set the limit to ZERO.

screen-shot-2023-05-25-at-112711-pm.png



screen-shot-2023-05-25-at-112711-pm.png (22.6 KiB)
4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

andy156 avatar image andy156 commented ·

And deselect the feed in excess toggles.

1 Like 1 ·
marekp avatar image marekp andy156 commented ·

@Andy156

I think, if you deselect "DC-coupled PV - feed in excess" MPPT charger will not supply the loads. It will only charge the battery.

0 Likes 0 ·
andy156 avatar image andy156 marekp commented ·
Ah,ok thanks. That might be handy for charging my car
0 Likes 0 ·
marekp avatar image marekp andy156 commented ·

Sorry I was wrong.

Just tested it and even if you deselect "DC-coupled PV - feed in excess" MPPT charger it will still supply loads. It will only not feed the grid.


0 Likes 0 ·