My system until now had worked fine, has a Lynx Smart Shunt. All loads and MPPT's wired to Victron Distributer.
Any shore power charging, MPPT charging all shows on the Cerbo GX correctly.
I just wired in an Orion Smart 30A DC-DC non isolated. While it does charge the system, and the Cerbo GX battery icon correctly shows "414 Watt charging" the DC icon shows an exact opposite "-414 Watts"
Why the "-414W" this shows a drain exactly matching the charge value ?
The system in reality is charging correctly and the battery will fully charge correctly when DC-DC is charging.
If you look at the Cebro GX and saw charge = 414W and DC = -414W in theory this means zero charge, yet its charging ?
I have the + from the DC-DC Orion into the Victron Distributer and the common - of the DC-DC Orion also to the Victron Distributer, same as I have the MPPT chargers.
Any ideas why DC-DC charging shows as a negative DC draw on the Cerbo GX while at the same time it shows the exact same charge ?