Hi, could you please tell me what charger settings I will require to charge Victron Lead Carbon batteries with my new Victron MutiPlus inverter/charger. Thanks.........Martin
asked
Charging Lead Carbon Batteries
Hi Martin,
see the Lead Carbon Batteries datasheet:
https://www.victronenergy.com/upload/documents/Datasheet-Lead-carbon-battery-EN.pdf
It should contain every information you need, to setup your Multis charging parameters.
Regards,
Markus
Hi Markus
the data sheet isn’t very informative at all, did you ever find any more information on the lead carbons?
regards
Thank you Markus, much appreciated!!
Hi! Sorry for hijacking this tread, but I'm also looking for some more detailed recommendation for a good charging profile for these batteries. The datasheet is not very specific:
For example it "says charged a rate not exceeding 0,2C" and it has this table of charge voltages:
For example:
- Whats the recommended settings in Victrons own SmartSolar MPPT solar controller?
- What's the recommended absorption time?
- What's the temperature compensation?
The datasheet (https://www.victronenergy.com/upload/documents/Datasheet-GEL-and-AGM-Batteries-EN.pdf) for Victrons AGM and GEL batteries are much more detailed.
Hi, did you et find anything more detailed than that poor data sheet that people refer too?
@Sud you keep asking in different threads.
Nothing else has been made available. Please use standard AGM or Gel settings for any you're missing.
