Hi,
I have ET112 connected to Cerbo GX as Generator that measures AC that goes to battery charger.
I run the charger when the battery voltage drops bellow a treshold, it is simple AC to DC charger. There is no victron AC inverter so I measure load by DC Power.
My problem is that no matter what I configure, it always shows in AC Loads. It looks like it charges with 800W and also discharges with 800W at the same time with imaginary AC Loads that does not exist. DC Power shows correctly charging with -800W. From technical point of view it works, but shows nonsense.
Is there a way to show the generator only as power input?
My system is pretty simple, SmartSolar, BMV-712, no ESS, just DVCC, no victron inverters.
Thanks