question

Anil Ghatikar avatar image
Anil Ghatikar asked

Multiplus II- Current sensor 100A:50mA

Can anybody who is using confirm if the Multiplus II Current sensor 100A:50mA indicates the correct values form the time it is installed or like the Old AC current sensor - ( https://www.victronenergy.com/accessories/ac-current-sensor ) it takes some time to start reporting the correct values



Multiplus-II
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Rob Duthie avatar image Rob Duthie commented ·

Hi Anil

Yes i have being using current sensor and it reports the correct values OK.

Regards

Rob D

0 Likes 0 ·
Rob Duthie avatar image Rob Duthie commented ·

Hi Yes the Current sensor of 100A : 50mA is Ok and is fairly accurate.

0 Likes 0 ·
1 Answer
Paul B avatar image
Paul B answered ·

just moving this out of unanswered questions

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.