question

mikli avatar image
mikli asked

Rpi + 5 inch touch screen - dimming issue

Hi, I bought a Waveshare 5 inch DSI touchscreen to my Raspberry Pi and it worked perfect directly out of the box. The only thing I have not managed to solve yet is to get the dimming to work to conserve energy when the screen is not in use. I have downloaded the RpiDisplaySetup but it will not install. According to the instruction I need to install from the command-line but that's where I'm stuck. How do I manage to install the package then? Any other tips to manage the dimming / standby mode of the Waveshare screen?

Raspberry Pidisplay
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Kevin Windrem avatar image
Kevin Windrem answered ·

You need to run /data/RpiDisplaySetup/setup from a command line prompt either via SSH or a keyboard and mouse plugged into the Pi.

Running Venus OS on a Raspberry Pi isn't plug and play and does require some customization requiring command line (aka terminal) access along with unix knowledge.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mikli avatar image mikli commented ·
Thanks for your your reply! Unfortunately I don't have any Unix skills what so ever. Any advice on how to get back to the commandline as the Victron start screen loads automatically?
0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic

Additional resources still need to be added for this topic

Raspberry Pi running Victron’s Venus firmware - Blog Post

Venus OS Large image: Signal K and Node-RED - Install

raspberrypi install venus image