Scheduled Charging seems not working

Hello,

I'm trying to reduce the system (Multiplus II 5000-48 with 2 Pylontech US3000C battery) grid consumption and not over charge the batteries.

I used the configuration Schedule 1, with time and Stop on SOC. I do not anything happening. Is it working?

If not working. Is there a way to control the charge (digital input, contact) by an external automation, without using the on-off contact on the Multiplus II.

Thanks

Yannick

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra ♦ commented · Jan 06, 2023 at 05:55 AM

Are you batteries not charging to 95% during that time?

0 ·

yannick1 commented · Jan 06, 2023 at 11:41 AM

I have 93% and 51.8V now. I don't know why it goes down to 93% without any charge I had 96% yesterday. Thanks

0 ·

Alexandra ♦ yannick1 commented · Jan 06, 2023 at 06:23 PM

Is your system using the pylon SOC or its own internal monitor? In system set up?

0 ·

question