question

yannick1 avatar image
yannick1 asked

Scheduled Charging seems not working

Hello,

I'm trying to reduce the system (Multiplus II 5000-48 with 2 Pylontech US3000C battery) grid consumption and not over charge the batteries.

1672938728224.png

I used the configuration Schedule 1, with time and Stop on SOC. I do not anything happening. Is it working?

If not working. Is there a way to control the charge (digital input, contact) by an external automation, without using the on-off contact on the Multiplus II.

Thanks

Yannick

battery charging
1672938728224.png (60.3 KiB)
3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·
Are you batteries not charging to 95% during that time?
0 Likes 0 ·
yannick1 avatar image yannick1 commented ·

I have 93% and 51.8V now. I don't know why it goes down to 93% without any charge I had 96% yesterday. Thanks

0 Likes 0 ·
Show more comments
0 Answers