question

Tom Hart avatar image
Tom Hart asked

Multiplus II 24v stopped working after shore power disconnected

I have a Multiplus II 24v that has been working fine until I unplugged from a 50a shore power and now I cannot get it to turn back on. I am getting 26v at the terminal lugs. I also have tried turning everything off, waiting, then turn on, but still nothing

Multiplus-II
5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image kevgermany ♦♦ commented ·
Will it turn on if shore power reconnected?

Have you checked the turn on voltage in the Multiplus settings?


0 Likes 0 ·
Tom Hart avatar image Tom Hart kevgermany ♦♦ commented ·

Works fine on shore, just shuts down when unplugged, where di I find turn on voltage

0 Likes 0 ·
Alexandra avatar image Alexandra ♦ Tom Hart commented ·

@Tom Hart

If it works on shore power but no on inverting, then either

1. your batteries are dead/depleted or

2. the fuse/disconnect between the inverter has blown or tripped.

By 26v at the terminals are you measuring this with or without shore connected?

0 Likes 0 ·
Tom Hart avatar image Tom Hart Alexandra ♦ commented ·
Batteries are fine, 26v is without shore also tests same at battery
0 Likes 0 ·
Show more comments
0 Answers