question

mariusv avatar image
mariusv asked

Wiring diagram for multiple Pylontech US3000C battery banks

Heya,

Can someone please help me with a wiring diagram for 4 banks and each bank having 4 batteries in it with a total of 16 x US3000C Pylontech batteries, all of this will be done without a LV-Hub (I know is possible because is said so in the docs).
My problem is how do I connect all 4 banks to each other using the positive and negative cables ? Do I use an isolated bus bar and then the first and last battery for each bank will be connected using a Victron Lynx Power In to the inverter or how do I do it?

Thank you!

Pylontechquattro 10kva
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
klandos avatar image
klandos answered ·

I’ve the same setup running.

Every 4 pylontechs are in parallel.

Every stack of 4 is connected with a 100A fuse to a lynx distributor.

The oem cables are rated for up to 125A. On top a total of 400A is enough for my setup.

8 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mariusv avatar image mariusv commented ·

@KLandos something like this I was thinkinguntitled-2022-12-01-1839.pngAnd this would be the bus bar I was thinking to get so I can put all 4 packs in parallel

busbar-300a-1.jpg

0 Likes 0 ·
untitled-2022-12-01-1839.png (367.4 KiB)
busbar-300a-1.jpg (65.2 KiB)
klandos avatar image klandos mariusv commented ·
Just use a lynx distributor.

Fusing is then also done there.

In total 4 cables from the lynx to the 4 x4 pylonstacks. Don’t interconnect them extra.


0 Likes 0 ·
Show more comments

Related Resources

Victron Pylontech battery compatibility guide

Additional resources still need to be added for this topic