question

njms17000 avatar image
njms17000 asked

Victron quatro 5000 no passthrough, and shut off when goes to charge .

hello, my Victron Quatro 5000 12v,

1.not alarm code, when I connect battery, it does anything.

2. with rocker switch in on position, only when voltage input on ac 1 or 2 are present it is turning on inverter mode but when should change to passthrough I hear click and turning off immediately. and restart again same behavior

3. with rocker switch in charge only it also shutting off after I hear click

victron community
whatsapp-video-2022-11-18-at-52623-pm.mp4 (2.3 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·
@Njms17000

Check the connection to the battery and the battery itself.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

njms17000 avatar image njms17000 commented ·

20221121-075950.jpgImage CaptionThank you , i found a fuse open on input board , now I will go to check causes that blow the fuse . May be a contactor coil.

0 Likes 0 ·
20221121-075950.jpg (1.7 MiB)

Related Resources

Additional resources still need to be added for this topic