In our three phase Quattro system, we have both grid power and generator power available. Sometimes when the grid power is connected, the power being used is more than the capacity of the inverter. When the grid switches off, the inverters can go into overload if the power being used is close to or exceeding the capacity of the inverters. The generator is automatically started in that situation, but the inverter will not restart because the error must be manually cleared. When it does restart, it starts in inverter mode and then changes to generator. Is it possible to configure the inverters to restart automatically in passthru mode after the generator has started? As it is, the generator is started but because the inverters cannot restart it just burns fuel doing nothing until the system is reset.