I have a Cerbo GX with the latest firmware, and the proper temperature sensor connected to temp port 1 of the cerbo. I activated the analog IO setting so the temp sensor output 1 is also shown on my main screen, displaying the proper temperature.
But when getting into setting>relay menu, the option to pick temperature sensor function is not available. I tried to connect the temp sensor on my multiplus, but same problem. I rebooted the device, not working either.
Any reason why I cannot see the temperature sensor function in the relay activation menu of the cerbo gx?
I want to use the temperature sensor and relay to activate a cooling fan (as described here) https://community.victronenergy.com/questions/119332/cerbo-gx-temperature-relay-to-start-up-a-cooling-f.html
(Edit):
Here are some screeshots
1- Showing the battery temperature sensor connected to cerbo GX #1
2- Cerbo GX analog input activated for the temperature sensor 1
3- Entering the Cebro gx relay menu
4- Temperature relay function not in the list