question

joe2 avatar image
joe2 asked

Multiplus II with ESS + second Multiplus II with Generator + Pylontech Battery

I have a Multiplus II installed with ESS and 3 Pylontech 2000 Batteries. Now I want to add a second Multiplus II to connect a Generator on AC In 1.


At the moment the Pylontech are connected to the Venus GX and as I understand controlled from there.

How can I connect the second Multiplus II to the Venus Gx that the Batteries will charge when the Generator is running?

Multiplus-IIESSPylontechGenerator
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@Joe2

The GX only supports one connected VE bus product at a time.

So unless they are configured in Parallel there is no way to monitor or control the second Multiplus off your one GX.

3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

joe2 avatar image joe2 commented ·

Thank you for your answer! Is it possible that the second Multiplus II charge the Pylontech battery without connection to the Venus Gx?

0 Likes 0 ·
Show more comments