Hi All,
I have a Victron ESS that consists of the following:
MultiPlus II GX 48/5000
1 x Victron BlueSolar 150/35 (Connected via VE.Direct) - 2kWp Solar Array
1 x Victron SmartSolar 150/35 (Connected via VE.Direct) - 2kWp Solar Array
2 x Pylontech US3000B Lithium Batteries
1 x ASS030720018 - VE.Can to CAN-bus BMS type B Cable 1.8m
1 x Carlo Gavazzi ET112 Grid Meter
The GX device is frequently losing connection to all of the peripherals - The 2 solar charge controllers, the grid meter and sometimes the canbus battery.
The worst is when it disconnects from the Pylontech battery, because then the battery is not receiving the "Keep-alive" signal and the system will consequently trip/shut-down after some time.
To resolve this, I need to reboot the GX device each time using the Remote Console.
The inverter has been updated to firmware level 482 and the GX device is on firmware level 2.66.
Does anybody have insight into this problem?