This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
my battery relay disconnected the battery for a split second while I was feeding to the grid. Bad connection.
After that event, the Multi's GX no longer responded. I power-cycled the whole system, but now the GX display says "system halted".
Owch.
What do I do now? "Ignore the built-in GX and use a Raspberry Pi 3 with Venus instead" is an option I'd rather not pursue, if at all possible. :-/
It recovered somewhat but the kernel log contains heaps of these lines:
[ 2208.192058] thermal thermal_zone0: critical temperature reached (137 C), shutting down
Owch. Something seems to be badly broken. Time to hunt down the screwdriver and the FLIR camera …
