This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I’ve had to send my GX Touch back because it has a problem. I can control all the components of my system connected to my CerboGX through my phone except the Multiplus Which doesn’t appear anywhere except the GX Touch.
How do I control that without a Touch?
Use the remote console and your phone browser, you will see exactly the same screen as you do on the touch.
Steps to Manually Connect:
Stand as close as possible from the Cerbo GX, and no further than a few meters away.
Go to the WiFi settings on your phone / tablet / laptop.
After searching, the Cerbo GX will show up in the list, as Venus-HQ1940DEFR4-3b6. Where HQ… is the serial number as printed on the side of the box.
Open VictronConnect, it will start scanning the WiFi network automatically.
Once found, select the GX device from the list.
Open the Remote Console
You need to connect to the WiFi of the GX itself using your phones WiFi.
There is a sticker on the bottom with the details.
I don’t suppose the info on the bottom of the CerboGX is anywhere else? That’s going to be tricky…
It doesn't give me the option for a remote console.
