Hi i have an old multiplus 24/3000/70 with firmware #2012132 and would like to add assistants so i have updated with #2012209 the software did not complete .Help..i now have flashing led on multi and is after hours for dealer contact support.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi i have an old multiplus 24/3000/70 with firmware #2012132 and would like to add assistants so i have updated with #2012209 the software did not complete .Help..i now have flashing led on multi and is after hours for dealer contact support.
Try to run the update again, normally this works.
Hi i tried 15 or more times but same result [Error connecting please try again] any other things to try?
Do it exactly step by step.
At what point do you get the error?
Describe how you do it or make a video.
Thanks for the support have retried another 20 times with every direction followed .I still have flickering lights . When i select ok from the ready to program screen i get a general error occurred.Is there any way to reset the chip other than on/off of rocker switch. I removed shore power while trying to program .What is the next step??
Additional resources still need to be added for this topic
25 People are following this question.