question

pabou38 avatar image
pabou38 asked

ET112 energy meter / Cerbo GX. baud rate

I have a ET112 energy meter, a RS485 to USB (serial) cable and a cerbo GX. What is the serial baud rate (9600 ??, 115200 ??) the cerbo uses over the USB serial connections ?.

CONTEXT: the ET112 and the Cerbo are remote, and I am building my own device to connect the USB serial on the ET112 side to the USB serial on the cerbo side.

I know about the zigbee adaptors, but do not want to use those.

Thanks you

cerbo gxESSEnergy Meter
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
lifeingalicia avatar image
lifeingalicia answered ·

https://manualzz.com/doc/55944529/carlo-gavazzi-et112dinav11xs1x-datasheet 9.6, 19.2 kbaud, even or no parity

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

b67victron avatar image
b67victron answered ·

Have the same question but the giving answer is not what I am looking for .

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Paul Beskeen avatar image
Paul Beskeen answered ·

It defaults to 9600, but you can change it, if necessary, with the Carlo Gavazzi "Configuration/Debug software: UCS7". Select "Configuration and Software" on this page:

https://www.gavazziautomation.com/nsc/HQ/EN/product/ET112DINAV01XS1X

Paul.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.