question

eliott avatar image
eliott asked

EV Charging Station in off grid mode with SOC based charging

Hi! Will this feature be available when the EV Charging Station will go on sale?


thanks

ev charging station
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

5 Answers
eliott avatar image
eliott answered ·

Any info? Also the aim would be to use as little battery as possible with the MPPT or RS Inverter and mainly use the surplus PV Energy for car charging. Is this doable?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kaffeetasse avatar image
kaffeetasse answered ·

Good question.
I have my EV Charger wired to the relay output of my Cerbo GX. I can now switch it on / off manually via the vrm portal but it would be great if there was an option to assign it to the SOC or other values such as Battery load and have it switch automatically.

9 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

eliott avatar image eliott commented ·
Do you have a Victron EV Charger? Did you check if it supports Node Red?
0 Likes 0 ·
kaffeetasse avatar image kaffeetasse eliott commented ·
I do not have one from victron, but I have now managed to program a logic via the Generator Start/Stop function.
0 Likes 0 ·
Alexandra avatar image Alexandra ♦ commented ·

You can also use the relay on a smart shunt or bmv to achieve the SOC switching.

Or have the charger on AC2 of an inverter that is also programmable on SOC

0 Likes 0 ·
enfrafer avatar image enfrafer Alexandra ♦ commented ·

Hello @Alexandra, interesting your comment.

Would you be so kind to help me find more information about this option? I am quite new with my installation and need to manage SOC to stop discharging the battery when I charge my EV. Today I have to manually change to "keep battery charge" or increase the SOC %, but I would like to have something more automatic.

0 Likes 0 ·
Show more comments
shaneyake avatar image
shaneyake answered ·

If you have a GX and the Victron charger this should be possible.

It also already has NodeRed integration so you can very easily setup your own rules to control it.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Iain avatar image
Iain answered ·

Also interested to know more about how the ev station can be switched off based on soc, both on and off grid systems. Doesn't seem to be possible now or am I missing something?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Michelle Konzack avatar image
Michelle Konzack answered ·

I use the relais output of one (I have 3 with 6,78kW total) of my SmartSolar to switch on a 3,6kW EV charger (I have only to switch on a Relays which switch a standard wall socket.


It switch on, if the SmartSolar goes into float.

Maybe it is even better to use Absobtion.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.