Hi! Will this feature be available when the EV Charging Station will go on sale?
thanks
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi! Will this feature be available when the EV Charging Station will go on sale?
thanks
Good question.
I have my EV Charger wired to the relay output of my Cerbo GX. I can now switch it on / off manually via the vrm portal but it would be great if there was an option to assign it to the SOC or other values such as Battery load and have it switch automatically.
You can also use the relay on a smart shunt or bmv to achieve the SOC switching.
Or have the charger on AC2 of an inverter that is also programmable on SOC
I use the relais output of one (I have 3 with 6,78kW total) of my SmartSolar to switch on a 3,6kW EV charger (I have only to switch on a Relays which switch a standard wall socket.
It switch on, if the SmartSolar goes into float.
Maybe it is even better to use Absobtion.
30 People are following this question.