We are trying to measure the energy consumption of individual air conditioners, using one ET112 for each and collecting the data through a CCGX but we only get one displaying. Is this not possible?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
We are trying to measure the energy consumption of individual air conditioners, using one ET112 for each and collecting the data through a CCGX but we only get one displaying. Is this not possible?
I have more than one energy meter in my system. One is assigned to measure grid, the other is assigned to measure PV power. Some people have three meters if they have PV on either side of the Multi / Quattro.
Did you make sure that the meters have different MODBUS ID's or is each one on it's own RS485 - USB interface?
They are all on separate RS485-USB cables via a USB hub to the CCGX.
Do you see the input from each ET112 on the screen? I would imagine the maximum is 3 (if you assign 1 to mains/genset, 1 to PV and 1 to load)?
11 People are following this question.