question

per-erik avatar image
per-erik asked

Is it not possible to use multiple energy meters (ET112) on one CCGX?

We are trying to measure the energy consumption of individual air conditioners, using one ET112 for each and collecting the data through a CCGX but we only get one displaying. Is this not possible?

CCGX Color ControlEnergy Meter
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
wkirby avatar image
wkirby answered ·

I have more than one energy meter in my system. One is assigned to measure grid, the other is assigned to measure PV power. Some people have three meters if they have PV on either side of the Multi / Quattro.

Did you make sure that the meters have different MODBUS ID's or is each one on it's own RS485 - USB interface?

11 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

per-erik avatar image per-erik commented ·

They are all on separate RS485-USB cables via a USB hub to the CCGX.

0 Likes 0 ·
Show more comments
basz avatar image basz commented ·

Do you see the input from each ET112 on the screen? I would imagine the maximum is 3 (if you assign 1 to mains/genset, 1 to PV and 1 to load)?

0 Likes 0 ·
Show more comments
per-erik avatar image
per-erik answered ·

Does anyone have more ideas around this? We have the ET on one Victron RS485 to USB cable each - connected to a USB hub and then to the CCGX.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.