question

duswami avatar image
duswami asked

Do i need seperate Bluetooth dongles for MPPT CC and Multiplus II

I want to view both the SS MPPT CC and the Multiplus II in Victron Connect. Not using a GX device. Do I need to use two separate Bluetooth dongles for each device? I have one, it appears the smart shunt, and the CC have BT built in.. Limited range.

Multiplus-IISmartShuntBluetoothsmart solar set-up helpVE.Direct Bluetooth Smart Dongle
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@Duswami

You will need the VE Bus Smart dongle for the Multiplus to monitor in victron connect. And yes the BT dongle will work for the MPPT.

3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

duswami avatar image duswami commented ·
Ok great, I have both of those, thanks.
0 Likes 0 ·
duswami avatar image duswami commented ·
So I have the MK3-USB connector, do I really need this, or will I be able to do configuration settings over Bluetooth?
0 Likes 0 ·
Show more comments