Good day, I am looking at adding some panels to my house.
I am however struggling to understand the mppt charge controllers ratings from Victron data sheet.
https://www.victronenergy.com/solar-charge-controllers/smartsolar-250-85-250-100
I am looking at putting 6 * 460w panels.
Voc= 50.01
Vmpp= 42.13
Configuarion would be (2x3) so we would be running at Voc = 150.03 and Vmpt= 126.4
With a Smart Mppt 150/70 charge controller.
In the manual, it says the MAX solar voltage is 150 (Absolute max in bracktes). Now I need to try and understand. Does that mean I can run this panesl on this unit? My understanding is that the mppt controller when running wouldn't ever really let the voltage get that high.
I know Victron is generally pretty good at under specing In their data sheets and over-delivering in the product.
Do I run any risk with this setup?
