This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,I am running a 100w flexi panel to my victron 75/15 mppt controller,fused to my xtreme 200ah gel battery with a 15 amp inline fuse,can I add another 100w panel without upgrading wires,charge controller and fuse,I am hoping it’s just a matter of adding it with the appropriate connectors thanks steve
Yes you can. but as you have not mentioned wire sizes I cant advise on that
however you could put the to panels in series and thus the current would not increase
but you would have to make sure the voltage did not go over 75 volts
thanks.checked they are 4.0mm.due to lack of sun,i was wondering if i added another 100w panel would this be better to power battery up'cause i have a 3000w inverter,do i connect series or parallel, thanks
