This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi
Is is possible to connect a smart solar 150/35 and a blue solar 100/30 in parallel as I have a mismatched panel I would like to use in the same 24 volt battery bank.
They both have 1.37 firmware is this the latest ?
If this is possible how can it be done/wired
Thanks
1.37 is current.
Providing the Vmp of your orphaned panel is >30V (say), it should contribute.
Just parallel into the same terminals as your existing system.
