Can you parallel up similar size Multiplus and Multiplus 2 devices - single phase ?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Can you parallel up similar size Multiplus and Multiplus 2 devices - single phase ?
Hi Merle,
All units in a parallel or 3 phase system must be the same type and firmware version, this includes same size, system voltage, and feature set.
The type is indicated by the first four digits of the firmware version number. For details, see the “VE.Bus Firmware Numbering System” section in the VE.Bus Firmware versions explained document.
You cannot parallel a Multiplus with a Multiplus-II. Please read this manual for further conditions:
https://www.victronenergy.com/live/ve.bus:manual_parallel_and_three_phase_systems
Might be the same answer but not looking at 3 phase though but doubling up capacity
7 People are following this question.