This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
From my previous question :-
Reversed UPS on Victron Energy MultiPlus ? - Victron Community
I've looked at the Demo products and found it is possible to do what I want , BUT it looks like even setting the battery type is protected by a password looking it videos .
Is this password just a formality ? if not this product is totally useless and looks like I should get the phoenix inverter or is that password protected too ?
It is in the manual. To change basic settings and update firmware with Victron Connect is zzz. It does prevent accidental changes.
The only other thing that will need a not shared password for reglation reasons is the grid code setting. But you don't need to set that for basic AC ignore reasons.
If I can change all the setting like get it work on life batteries etc , fine by me .
I DON'T WANT IT TO FEED ANY ENERGY TO THE GRID , just use the main for backup power and panic charging .
Didn't see anything in the on-line manual , only the password is for Victron registered installers only
I guess I got caught on this issue too. We dont want to feed any energy to the grid but mistakenly and foolishly we set the country region to where we are (Italy) and now realized we want to go back and select the option (feed to grid not allowed - default option). 1.- I guess I fail to understand why you need a password just to reset the unit to factory defaults and 2.- while I can understand you you need some password to select a different country region from the one that was set to another region, why do you need a password to go from feed to grid to feed to grid NOT allowed. at any rate,how does one get a password to bring unit to factory default
By chance it seems your question has just been answered in this thread.
